Made-to-measure natural wood wardrobes in Calp
Ordering a natural wood wardrobe in Calp doesn't mean everything is cut from solid timber. It means knowing which part is real solid wood, which is natural veneer over a board, and what goes inside. In Calp we design made-to-measure natural wood wardrobes with the specification written down: species, grain, tone, finish and maintenance. Here is what is worth deciding before you see the first plan.
Shape your next wardrobe.
Try out the measurements, plan the interior layout and choose your finishes. See your idea take shape and share it with us so we can prepare your quote.
Send us your configuration with your measurements and we'll give you a guide price within 24 hours, free of charge. The measuring visit at your home comes afterwards.
What "natural wood" really covers
The term covers different materials. It can be solid wood, meaning pieces of a single species cut from the trunk; it can be a natural wood veneer, a thin sheet of real wood glued onto a board; or it can be a board with a finish that imitates the grain. All three are legitimate, but they are not the same thing.
When someone asks for a natural wood wardrobe, they usually want to see and touch authentic wood on the visible parts. That can be achieved with solid wood or with veneer. The key is to name each part of the piece so that the price, the look and the durability are clear from the start.
Solid wood, natural veneer and the board underneath
Solid wood has presence, can be sanded and repairs scratches well, but it moves with changes in humidity and is the most expensive option. Natural veneer gives you the same grain with a stable board underneath, which reduces the risk of warping in large doors.
The base matters as much as the visible layer. A chipboard, plywood or MDF base changes the weight, how well the screws hold and how it copes with humidity. An oak veneer on a good base can last a long time; on a flimsy one, it suffers. That is why the proposal describes the whole construction, not just the top layer.

Which wood goes on the doors, sides and back of the wardrobe
A wardrobe has three zones with different needs. The doors are seen and touched every day, and that is where the wood shows off most. The carcass, meaning the sides, top and base, is seen when you open up. The interior is better protected and can take plainer materials.
In Calp, where the sun and the sea salt in the air punish finishes, this breakdown helps in choosing the right protection. A common combination is solid wood or natural veneer on the doors and visible sides, and a board with a hard-wearing finish inside, in a similar tone. That way the natural wood look is kept where it matters and the quote doesn't balloon on areas nobody looks at every day. Drawers, for example, can have a veneer front and an inner box in board, and high shelves that are hardly ever seen can be made in a simpler material.
Have you already measured the space?
Send us a photo and the approximate measurements on WhatsApp and we'll give you some initial guidance.
Grain, tone and continuity between doors
- 01
Natural wood is not uniform: two boards from the same tree can differ in colour and pattern. In a wardrobe with several adjoining doors, that variation becomes a design decision. You can aim for continuity, with the panels cut in sequence so the grain flows from one to the next, or accept a more natural, varied look.
- 02
The direction of the grain is also decided: vertical to add height, horizontal to widen. It's worth seeing real samples of the species, with the varnish or oil it will have, and comparing them in the light of the room, which changes the tone a lot. Once the sample is chosen, the materials sheet is drawn up. If the room has plenty of natural light, a medium tone hides differences better than a very light or very dark one.
Latest work by SI, ARMARIO
@si.armario
Made-to-measure wardrobes and walk-in wardrobes
Latest posts
Protective finish and maintenance
The finish protects the wood and defines its look. A water-based varnish leaves a discreet, hard-wearing coat; an oil keeps the feel of the wood and can be reapplied; a matt lacquer covers evenly. Each needs different care and behaves differently with wear and sunlight.
For everyday use, a soft, slightly damp cloth is enough, and you should avoid abrasive products. Wood changes tone over time and with light, especially if it gets direct sun from a window. Near the sea, with salty air, the protection needs renewing a little more often. We recommend touching up the oil from time to time and not placing hot or wet objects on the surfaces.
Design and stability of large pieces
A tall natural wood door suffers more than a small one: any change in humidity tends to bow it. The design prevents this with veneer over a stable board, with narrower doors, or with rails and frames that keep it flat.
The weight of the doors also counts: a large solid wood front calls for reinforced hinges and a wall or structure to support it. Long shelves are split or reinforced with a thicker edge so they don't sag under load. These decisions are made on the plan, before manufacture, and not once the wardrobe is already in the room.

Ask us to come and measure up in Calp
- 01You leave us your name and your area.
- 02We message you on WhatsApp to agree a day.
- 03The measuring visit costs €50 and is free if you place an order.
What affects the price of wood in Calp
The cost of a natural wood wardrobe depends mainly on three things: the species, the proportion of solid wood to veneer, and the complexity of the design. Oak, walnut and ash don't behave the same way in a quote, and neither do a flat door and one with frames and mouldings.
The surface area also counts. A wardrobe with a veneer carcass and solid wood fronts costs differently from one that is all veneer. To get an idea, prepare your design in the configurator and note down your preferences. The team will send you a guide figure, and on pricing we explain which factors move it.
What the quote should spell out
- 01
The proposal for a natural wood wardrobe lists each part with its material: species, whether it is solid or veneer, what board is underneath, what finish it has and how the interior is treated. It also records the grain direction and the reference sample.
- 02
This avoids the most common mix-up: thinking you are buying solid wood and receiving veneer, or the other way round. After the guide estimate, the measuring visit costs €50 if you don't place an order, and it confirms the final design. Manufacturing usually takes two to three weeks on average, and installation is arranged separately. If you live in Calp or the surrounding area, we'll go through every detail together.
Enquiry
Tell us about your project in Calp
- 1We read your message and look at your photos.
- 2We reply on WhatsApp with a first figure.
- 3We measure up and prepare the final quote. The measuring visit costs €50 if you don't go ahead with the order and is free if you do.
We don't cut a single board until you've approved the design and the price.
Questions
Frequently asked questions about wardrobes in Calp
After installation: warranty and care for your wardrobe.
Does a natural wood wardrobe have to be all solid wood?
No. The most common approach is to combine solid wood on the visible parts with natural veneer over a stable board. It looks like authentic wood, and the wardrobe ends up lighter and more stable.
How can I tell real wood veneer from a printed effect?
Veneer is real wood in a thin sheet; its grain never repeats exactly. A wood effect is an image printed on another material and repeats at regular intervals. Both are valid, but they are priced differently.
Can I choose the grain and tone from a sample?
Yes. We work with samples of the species and the finish, and compare them in the light of your room. What you choose is written on the wardrobe's specification sheet.
How much does wood change in the sun?
It tends to darken or lighten depending on the species. A wardrobe near a window can show differences between the exposed and the protected areas, which is why we recommend a finish with a UV filter.
Which parts are worth specifying separately?
Doors, visible sides, interior, shelves and edges. Each can use a different material and is noted down with its species and finish.
Shall we talk about your project?
Send us a photo of the space and some approximate measurements on WhatsApp: we'll give you some initial guidance and arrange the measuring visit.

